Stránky

Zobrazujú sa príspevky s označením DIY. Zobraziť všetky príspevky
Zobrazujú sa príspevky s označením DIY. Zobraziť všetky príspevky

streda 21. marca 2012

DIY: Dots don´t have to end the unfinished sentence only...

Well, 5.3. 2012 was date of another birthday party of my friend. Specifically, the birthday of my classmate Emma. There were everything what´s needed to have a hilarious party - little bit of eat, something to drink but extremly important is to be together on some place where we can lay our feet down :)
And what it would look like, if I came here with empty hands? So the present I gave her is this:


If you want to know how to do this, or if you want to do something what´s similar than continue reading, I tried to describe the process as best as I could.

You will need:
  • fashion fabric (try not to use stretch fabric)
  • nice big button (as an eye)
  • needle
  • sewing machine (if you have this possibility)
  • thread in whatever color you want (it won´t be seen), another in color of fashion fabric and finally in color of the button
  • pins
  • scissors
  • padding (I used cotton wool, which can be bought in every store)
  • nice music to listen, enough time and patience
To be honest, this is very easy project, the only tedious thing is stuffing :) But I don´t want to discourage you, so let´s start!

For the first, make a model of what you will sew. I had the idea of hedgehog (oh my dog, who invented this word? :) in my head for week, so I couldn´t say no to myself and I decided to make it. Well, I made a very simply model from paper, laid on the back site of two layers of the fashion fabric (right sides together), pinned it to keep it in place and drew a line round the edges.


Then I cut it out. Of course, I cut about 1cm from the drawn edge. After this process, I took the paper model away and pinned this two layers together again. Right sides together!



Yet, before I started to sew, I marked where I won´t sew. You need this keep unstitched because this is the place where you going to flip everything inside out through. I also used back stitch at the edges to secure it.


To stitch everything together you can use whatever thread you want, like I said, it won´t be seen.


After sewing, I turned everything inside out and I put black thread on the needle. Our hedgehog deserves to have an eye, although only one, but it does! :) So I sewed it on.


After all this processes, I started with stuffing. One advice from me: fill the horns for the first. They should be round like cone. Until you´ll be absolutely sure they are full of padding, then continue with filling the body.


After this steps (the longest) I needed to close the hole, which stayed unstitched (which I stuffed trough). I tried to do a little help for you. You just take the edges of the fabrick, fold them inside and stitch everything together.
                                                          ↑                                         ↑
                                     1. prepare your fabric                         3. stitch it
                                                                2. pin it to keep it in place
                                                                                  ↓

After this proces, I got this. :) As you can see, it needs something... ehm.. something... it´s too dry, it needs some juice :)

____________________________________________________

So I added this yelow ribbon ... et voilá :)

Well I know that it doesn´t look professionaly but it´s my work, and you know, when you try seriously, when you work hard, when you spend a time and when you gave it "little bit of you", then it is real valuable think :) I know, I still need to learn much, but with every needle play I try, I´m getting better (hope so) and with every bleeding I have from prick my finger, I´m getting stronger, more resistant, because when you learn how to fall, you´ll win against your destiny.






sobota 4. februára 2012

DIY: What is embroidered, will remain



How I promised, I´m adding a project of this Christmas - gifts for my friends :D It took me 2 days for each pendant. I have broken 3 needles :D It was real hard work but I´m proud of it and my friends looked so happy when I gave it to them :D So let´s get started...

You will need:
  • fabric
  • thread (one in color of fabric and some in different)
  • needle
  • scissors
  • pins
  • pencil
  • padding
  • design of letter for embroidery
  • ribbon
Well, for the first, cut two same pieces of fabric (I chosed oval) and draw the desing of letter which you chose on one of the two pieces. For exemple, I inspected fonts in Word 2010, which I have in my notebook. I didn´t find anything special so I continued in searching on the Internet. I found some sites with free fonts, so I downloaded about 10 gothic fonts (I bevlieve, that gothic fonts look very serious and elegant on separated letter). Then I opend my Word (or Power Point, or whatever you wont, it really makes no difference) and wrote the letter in this fonts and tried in which it will look the best. Try to choose some uncomplicated one, because it will take so much time to do it and you will be tired of it soon. Well, draw the final letter in middle of the piece of fabric, which you prepared before and put on the thread, in different color than it´s the fabric, to needle.
Go around the drawn line of the letter. Just like if you are sewing something. Then go around again and fill the places which stayed empty. Now, you should see the outline of the letter :) You are able to start embroider :D

Fill the place like this:


Try to get the threads to each as closest as it is possible. Don´t miss any place, which should be embroidered and embroider until the letter is full colored by thread.


Now, take both pieces of fabric (which you prepared at the beginning) and make sure, it they are same :D ... I know, it´s not deadly important..... just make yourself sure :)

Yes, they don´t look the same but it´s because of the wavy fabric on the right :D


Now, we are going to stitch :P So, take the pieces and pin them together :D I love my colorful pins! :D
DON´T FORGET!! RIGHT SIDES TOGETHER!! :D


You can also draw a line of where you will stitch if you prefer :D


Stitch around and don´t forget to stop 2 or 3 cm before the beginning. You need hole for stuff the pendant with padding. Take the pins away and turn over the pendant to the right side. Now, choose some nice ribbon....


Now skip to stuffing. I used cotton padding but you can use whatever you want. It´s all up to you. Fill the pendant until it´s full of padding. 


Now, take the ribbon you chose and pin it on top of pendant. Stitch it and close the pendant. Be happy now, IT´S DONE! :D


This is B in font "Medici Text"


E in font "Pauls Swirly Gothic Font"


S in "Pauls Swirly Gothic Font"


Z in "Vivaldy"


Ž in "VTC- Bad Tattoo Hand One"


S in "Strassburg Frukture"